Kenmore 9742 - 30 in. Electric Range Use And Care Manual page 24

Setting Oven Controls
• Setting Convection Convert
Feature
• Setting Add 1 Minute Feature
To set the Convection Convert feature
The c2;;_rt CONV CONVERT pad is used to automatically convert a standard baking recipe for convection baking. When
set properly, this feature is designed to display the actual converted (reduced) temperature in display.
Convection Convert MUST be used with a Convection Bake keypad. When used with a Timed Bake or a Delayed Timed
Bake setting, the Convection Convert feature will display a "CF" for check food when the bake time is 75% complete (See
Fig. 4). At this time the oven control will sound 3 long beeps at regular intervals until baking has finished. When the bake
time has completely finished the control will display "End" and will sound 3 long beeps every 30 seconds until the
pad
is pressed (See Fig. 5).
INSTRUCTIONS
Using Convection Convert feature to adjust oven
temperature from a Bake recipe (example below
when setting oven for 350°F):
1. Arrange interior oven racks and place food in oven.
2. Press B_;_,_, (See Fig. 1). If a Cook Time or a Delay Start is
desired, enter the times now.
3. Press co.vort "CONV BAKE" and the oven set temperature
adjustment will appear in the display (for this example it is
325°F). A beep will sound once the adjusted oven set
temperature is reached. (See Fig. 2).
PRESS DISPLAY
Fig. 1
Cony
Bake
co.v
Convert
Fig. 2
Notes: When used with a Cook Time or a Delay Start setting,
the Convection Convert feature will display a "CF" for check
food when the bake time is 75% complete (See Fig. 3). At this
time the oven control will sound 3 long beeps at regular intervals
until baking has finished. When the bake time has completely
finished the control will display "End" and will sound 3 long beeps
every 30 seconds until the _ pad is pressed (See Fig. 4).
Fig. 3
Fig. 4
The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating
(See Figs 2 or 3)
Press _ to cancel Convection feature at any time,
Note: The minimum amount of cook time using the Convection
Convert feature with a Cook Time or a Delay Start function is
20 minutes.
To Set Add 1 Minute Feature
The @ ADD 1 MINUTE pad is used to set additional minutes to the Minute Timer. Each time the @ pad is pressed, another
minute is added to the Minute Timer if the Minute Timer is already active. If the Minute Timer is not active and the _dd_ pad is
pressed, the Minute Timer feature will become active and will begin counting down from 1 minute.
When the Minute Timer reaches the end of the set time, the timer will display "End" and signal 3 long beeps at regular intervals until
@is pressed. If a Minute Timer function has ended pressing @ wilt restart the timer at 1 minute. For further information on how
to set the Minute Timer feature see To Set the Minute Timer instructions.
24