Setting Oven Controls - Kenmore 9742 - 30 in. Electric Range Use And Care Manual

Use and care guide
Table of Contents

Advertisement

Setting Oven Controls
Setting the Clock
Changing between 12 or 24 hour display
Setting
the Clock
The CLOCK @
pad is used to set the clock. The clock may be set for 12 or 24 hour time
of day operation.
The clock has been preset at the factory for the 12 hour operation.
When
the range is first plugged in, or when the power supply to the range has been interrupted, the
timer in the display will flash the time of day (Fig. 1).
INSTRUCTIONS
PRESS
Fig. 1
DISPLAY
To set the clock (example
below
for 1:30):
1.
Press @.
"CLO" will appear in the display (Fig. 2).
2.
Press @
@
@
pads to set the time of day to l:30 (Fig.
3). "CLO" will appear in the display. Press _.
"CLO" will
disappear and the clock will start (Fig. 4).
Changing
between
12 or 24 hour time of day display:
1.
Press and hold @
for 6 seconds (Fig. 3). While holding the
pad down the current time of day will remain and "CLO" will
disappear from the display (Fig. 4). CONTINUE holding the pad
until a beep is heard.
@
®@@
@
for 6 seconds
Fig. 2
Fig. 3
Fig. 4
2.
The display will show either "12h"(Fig. 5) or "24h"(Fig. 6).
3.
Press c_o_,
.... to switch between the 12 and 24 hour time of day
display. The display will show either "12h" (Fig. 5) or "24h"
(Fig. 6).
4.
Press _
to accept the desired change or press @
to
reject the change.
Clean
,
Reset the correct time as described in To set the Clock
above. Please note that if the 24 hour time of day mode was
chosen, the clock will now display time from 0:00 through 23:59
hours.
Fig. 5
Fig. 6
Using the Air Guard
TM
feature
Your appliance is equipped with a catalytic oven exhaust cleaner that may be turned on during any active cooking
process. This feature helps remove smoke and eliminates 85% of the odors generated when using your oven.
If you wish to have Air Guard
TM
clean the oven exhaust once cooking has started, press the @
key.
Note: The Air Guard
TM
indicator light will glow anytime the Air Guard
TM
is active. Air Guard will turn on and cannot be
manually turned off during the Self-cleaning cycle.
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

790.9742 series

Table of Contents