Maytag MGDZ400TQ - 27" Gas Dryer Use And Care Manual page 16

5. Rotate outer d oor 1 80 ° .
180 °
Reverse hinge
1. Use a small flat-blade screwdriver to remove 2 plug strips from the inner door. Slide the
head of the screwdriver under the plugs, being certain not to scratch the inner door
surface, lift up.
2, Remove the 4 screws that attach to the inner door hinge and move the hinge to the other
side. Reinstall the 4 screws.
°/
A. Door hinge
3. Reinstall plug strips on opposite side of the inner door.
4. Check for fingerprints on the glass. Clean glass if necessary.
5. Place the inner door assembly inside the outer door assembly. To fit correctly, the inner
door assembly edge fits completely inside the outer door assembly edge.
6. Reassemble the inner and outer door assemblies with the 6 screws.
16 ...........