4 Replacement Procedures
Removing the screws
1. Spread out the insulation sheet without detaching it from the side of the bezel, as
shown in Figure 4-46.
2. In the order (1) and (2) shown in Figure 4-46, remove the screws from the left- and
right-hand sides of the module.
CAUTION: To unfasten the screws, use an insert bit of point size 0 for Philips
screwdrivers.
2
2
> P C - G F 1 3 <
2
2
Figure 4-46 Replacing 14 Inch TMD fluorescent lamp (2)
4-66
FL破棄ラベル
FL disposal label
Label (cautions for disposal of FL tubes)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
4.18 Fluorescent Lamp
製品ラベル
Product label
BL S/N ラベル
BL S/N label
1
1
1
1