4049-XXX
Left Cover Removal
1. Unplug the power cord.
2. Open the top cover and remove the print cartridge.
3. Remove the front cover.
4. Locate the latch [ E ] and lift the end to release it.
5. Push the top of the cover to the left.
6. Remove the cover by sliding it to the rear of the machine.
Top Cover Removal
1. L, Lx, and Lx
2. Remove the top cover screws [C].
3. Lift the rear of the cover first, then the front, and lift the cover off.
4. Rest the cover on the machine and disconnect the operator
panel cable.
+
: Remove stacker plate by pulling upward.
Repair Information 4-12