Adding Or Replacing Memory Modules - HP 3125 User Manual

Adding or replacing memory modules

The computer has two memory module slots. The capacity of the computer can be upgraded by
adding a memory module to the vacant expansion memory module slot or by upgrading the existing
memory module in the primary memory module slot.
WARNING!
cord and remove all batteries before installing a memory module.
CAUTION:
any procedure, ensure that you are discharged of static electricity by touching a grounded metal
object.
NOTE: To use a dual-channel configuration when adding a second memory module, be sure that
both memory modules are identical.
To add or replace a memory module:
CAUTION:
Shut down the computer before adding or replacing memory modules. Do not remove a memory
module while the computer is on or in the Sleep state.
If you are not sure whether the computer is off, turn the computer on by pressing the power button.
Then shut down the computer through the operating system.
1. Save your work and shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Unplug the power cord from the AC outlet and remove the battery.
4. Remove the service door (see
5. If you are replacing a memory module, remove the existing memory module:
a. Pull away the retention clips (1) on each side of the memory module. The memory module
tilts up.
To reduce the risk of electric shock and damage to the equipment, unplug the power
Electrostatic discharge (ESD) can damage electronic components. Before beginning
To prevent information loss or an unresponsive system:
Removing the hard drive on page 49).
Improving performance 53