Removing An Optical Disc - HP 3125 User Manual

4. Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up
over the tray spindle.
NOTE:
5. Gently press the disc (3) down onto the tray spindle until the disc snaps into place.
NOTE:
6. Close the disc tray.
NOTE: After you insert a disc, a short pause is normal. If you have not selected a media player, an
AutoPlay dialog box opens. It prompts you to select how you want to use the media content.

Removing an optical disc

1. Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out
the tray (2) until it stops.
If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
If the tray is not fully accessible, tilt the disc carefully as you remove it.
Using optical drives 45