Error Messages - Brother P-Touch PT-18RKT User Manual

TROUBLESHOOTING
When an error message appears on the display, follow the directions provided below.
Press any key to clear the error message.
Message
58

Error Messages

Error Messages
The rechargeable battery is running low. Charge the battery
or connect the AC adapter before continuing.
An incompatible AC adapter is connected. Use only the AC
adapter designed exclusively for the rechargeable battery
provided with your P-touch.
The tape cutter is closed when you try to print or feed tape.
Turn the P-touch off and then on again before continuing.
When tape is tangled in the cutter, remove the tape.
There is no text, symbols or bar code data entered when you
try to print or preview a label. Enter data before continuing.
There is no tape cassette installed when you try to print or
preview a label, or feed tape. Install a tape cassette before
continuing.
The tape cassette is changed while printing, etc. Make sure
the correct tape cassette is inserted before printing.
There are already five lines of text when you press the
key. Limit the number of lines to five.
There are already three lines of text when you press the
or key while using 0.47" (12 mm) tape. Limit the number
of lines to three.
There are already two lines of text when you press the
key while using 0.35" or 0.23" (9 mm or 6 mm) tape. Limit
the number of lines to two.
The maximum number of characters have already been
entered. Edit the text and use fewer characters.
Cause/Remedy
or