Install the cache module.
9.
Install the capacitor pack.
10.
Route the cable.
11.
Install the access panel.
12.
For ML110 G6 servers, slide the server back into the rack.
13.
For ML150 G6 servers, do one of the following:
14.
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
o
Power up the server (on page 7).
15.
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
Installing the Trusted Platform Module board (on page 37).
1.
Hardware options installation 36