Head Gap Adjustment - Canon BJC 6000 - Color Inkjet Printer Service Manual

BJC-6000

5.2.4 Head gap adjustment

Preparation:
1) Reassemble to the level the top cover is to be put on next.
2) Raise both the right and left adjustable bearings supporting the carriage shaft in
the direction of arrow 1, and temporarily fix the bearings in that position using
the fixing screws (red).
3) Remove the right and left shaft clips from the carriage shaft.
4) Set the paper thickness selector to the lowest position (thick paper position).
CAUTION
Carriage Belt
Adjustable Bearing
Supporting
the Carriage Shaft (left)
Fixing Screw
(red)
Black BJ Cartridge
Ensure that the gap gauge is clean and not deformed. Also ensure that
the platen is clean.
Figure 5-9 Head Gap Adjustment (1)
Adjustable Bearing
Supporting the Carriage
Shaft (right)
Paper Thickness Lever
Normal Paper Position
Thick Paper Position
5-11
Part 5: Maintenance
1
Fixing Screw
(painted red)
Shaft Clip