Palm m100 Handbook page 65

Entering text
For information on entering text using Graffiti writing, the onscreen
keyboard, or your computer keyboard, see Chapter 2. For information
on entering text in Note Pad, see "Note Pad" later in this chapter.
Edit menu
The Edit menu is available with any screen where you enter or edit
text. In general, commands available in the Edit menu apply to text
that you select in an application.
To select text in an application:
1. Tap the beginning of the text that you want to select.
2. Drag the stylus over the text to highlight it (in black).
Note:
You can also double tap to select a word, or triple tap to
select a line of text.
You can also drag across the text to select additional
words, or drag down to select a group of lines.
The following commands may appear in an Edit menu:
Reverses the action of the last edit command. For
Undo
example, if you used Cut to remove text, Undo restores
the text you removed. Undo also reverses deletions
done by using backspace.
Cut Removes the selected text and stores it temporarily in
the memory of your handheld. You can paste the text
you cut into another area of the current application or
into a different application.
Copy Copies the selected text and stores it temporarily in the
memory of your handheld. You can paste the text that
you copy into another area of the current application or
into a different application.
Inserts the text that you cut or copied at the selected
Paste
point in a record. The text you paste replaces any
selected text. If you did not previously cut or copy text,
Paste does nothing.
Selects all of the text in the current record or screen.
Select
All
This enables you to cut or copy all of the text and paste
it elsewhere.
Page 59 Using Your Applications