Palm m100 Handbook page 12

Locating back panel components
Stylus
Reset button
Serial
(COM) port
Stylus
Face plate
tab
IR port
Reset
button
Battery
door
Serial
(COM) port
Chapter 1
Serves as a pointing device for navigating through
applications and entering data on your handheld.
To use the stylus, slide it out of the storage slot and
hold it as you would a pen or pencil.
Releases the face plate so you can personalize the
appearance of your handheld with another face
plate (sold separately).
Uses infrared technology to transmit data to and
receive data from other Palm OS
to perform HotSync operations. See "Beaming
information" in Chapter 4 and "IR HotSync
operations" in Chapter 5 for more information.
Under normal use, you should not have to use the
reset button. See Appendix A for information about
when and how to use the reset button.
Secures the batteries that power your handheld.
Connects your handheld to the HotSync cable,
which in turn connects to the back of your
computer. This allows you to update the
information between your handheld and computer
using HotSync technology.
Face plate tab
IR port
Battery door
handhelds, and
®
Page 6