Palm m100 Handbook page 163

Hide thumbs Also See for m100:
Table of Contents

Advertisement

3. Tap the Connection type pick list and select one of the following
connection types:
PPP
SLIP
CSLIP
Note:
If you are not sure, try PPP; if that doesn't work, ask your
Internet Service Provider or your System Administrator
for the correct connection type.
Idle timeout
The Idle timeout setting defines how long your handheld waits before
dropping the connection with your ISP or dial-in server when you
switch out of a TCP/IP application.
To set the Idle timeout:
1. Tap the Idle timeout pick list and select one of the following
options:
Immediate
1 minute
2 minutes
3 minutes
Power Off
2. Tap OK.
Page 157
Point-to-Point protocol
Serial Line Internet Protocol
Compressed Serial Line Internet Protocol
Drops the connection to your ISP immediately
when you switch to another application.
Waits one minute for you to open another
application before it drops the connection.
Waits two minutes.
Waits three minutes.
Keeps your PPP or SLIP connection until you
turn off your handheld (or until it times out). This
option works best with the modem.
Setting Preferences for Your Handheld
Select connection type

Advertisement

Table of Contents
loading

This manual is also suitable for:

M100 - os 3.5 16 mhz

Table of Contents