Color Correction; Screen Setting; Off - Panasonic PT-DW530E Operating Instructions Manual

6 ) Use the colorimeter to measure
the luminance (Y) and chromaticity
coordinates (x, y)
7 ) Press ▲▼ to select the colors, and
press ◄► to select their values.
If [AUTO TEST PATTERN] is turned [ON],
z
the test pattern of the selected color is
displayed.
8 ) After all the data has been input,
press <MENU> button.
The [ MEASURED MODE] screen will be
z
displayed.
Inputting the coordinates of a desired
Q
color
9 ) Press ▲▼ to select [TARGET
DATA].
10) Press <ENTER> button.
The [TARGET DATA] screen will be
z
displayed.
11) Press ▲▼ to select the desired
colors, and press ◄► to input
their coordinates.
If [AUTO TEST PATTERN] is turned [ON],
z
the test pattern of the selected color is
displayed.
12 ) After all the data has been input,
press <MENU> button.
Note
If the target data is outside the color range of the
z
projector, the colors will not be projected correctly.

COLOR CORRECTION

A different color can be adjusted and stored for each
input signal system.
1 ) Press ▲▼ to select [COLOR
CORRECTION].
2 ) Press ◄►to switch [COLOR
CORRECTION] setting.
The setting will change as follows each time the
z
button is pressed.

OFF

OFF Standard setting
Can adjust and store six colors
([RED], [GREEN], [BLUE], [CYAN],
[MAGENTA] and [YELLOW]) for
USER
each of the four VIDEO, S-VIDEO,
RGB, and YP
systems.
USER
P /YC C signaling
B R B R
DISPLAY OPTION menu
If you have selected [USER] in
J
step 2
3 ) Press <ENTER> button.
The [COLOR CORRECTION] screen is
z
displayed.
4 ) Press ▲▼ to select [RED], [GREEN],
[BLUE], [CYAN], [MAGENTA] and
[YELLOW].
5 ) Press ◄► to adjust.
The adjustable range is -30 to +30.
z

SCREEN SETTING

Set this in accordance with the screen you are using.
When the projection image aspect ratio is changed,
the projector makes corrections to ensure the optimal
images for the set screen size.
1 ) Press ▲▼ to select [SCREEN
SETTING].
2 ) Press <ENTER> button.
The [SCREEN SETTING] screen will be
z
displayed.
3 ) Press ◄► to switch [SCREEN
FORMAT].
PT-DZ570E
J
16 : 10 4 : 3
PT-DW530E
J
16 : 9
PT-DX500E
J
4 : 3
4 ) Press ◄► to adjust [SCREEN
POSITION].
In the case of the PT-DZ570E :
z
When [SCREEN FORMAT] is [16 : 9]
Adjustment range: - 60 to +60
When [SCREEN FORMAT] is [4 : 3]
Adjustment range: - 160 to +160
In the case of the PT-DW530E, you can adjust
z
the setting from - 132 to +131.
Note
[SCREEN POSITION] cannot be adjusted
z
when [SCREEN FORMAT] is [16 : 10]
(PT-DZ570E/PT-DW530E) or [4 : 3] (PT-DX500E).
16 : 9
16 : 10
16 : 9
55
ENGLISH -