Control Panel - Panasonic PT-DW530E Operating Instructions Manual

CONTROL PANEL

J
<POWER ON> button
Switch between stand-by mode and projection mode.
Switches to VIDEO or S-VIDEO input.
Switches to RGB1 input.
Switches to RGB2 input.
Switches to DVI-D input.
Switches to HDMI input.
Switches to NETWORK input.
<MENU> button
Displays and clears the main menu, and returns to the
previous menu when the menu is displayed.
Terminals on side
J
*
LAN
Connect a LAN cable for network connection.
DVI-D IN
Connect a single link DVI-D signals.
HDMI IN
Connect a HDMI signals.
VIDEO IN
Connect a VIDEO signals.
S-VIDEO IN
Connect an S-VIDEO signals.
RGB (YP P )1 IN
B R
Connect an RGB or YP P
B R
RGB2 IN
Connect an RGB or YP P
B R
Attention
Do not touch the LAN terminal with your bare hands or body, as body parts may have charged static electricity. Failure to
z
do so may cause malfunctions.
Do not touch the metallic parts of LAN terminal and cable.
Please connect the LAN to indoor devices only.
z
signals.
signals.
Start-up display
▲▼◄►button
Use these buttons to select menu items, change settings,
adjust levels, and to enter the [SECURITY] password.
<FUNCTION1> button
Assign the frequently use functions from options for
shortcut.
<ENTER> button
Press to activate a menu selection or to initiate a function.
<AV MUTE> button
Turn off the projection temporarily. (
<AUTO SETUP> button
Pressing this button while projecting an image automatically
corrects the picture positioning on the screen. While the
auto setup feature is active, a message "PROGRESS"
Æ
appears on the screen. ( page 38)
*
DVI-D IN (PT-DZ570E/PT-DW530E)
Connect a single link DVI-D signals.
SERIAL IN
Connect an RS-232C cable from/to a computer.
REMOTE IN
Connect a cable from an external control circuit.
VARIABLE AUDIO OUT
Connect an audio cable for outputting audio signals to the
connected equipment.
AUDIO IN 1-3
Connect audio cables for inputting audio signal
corresponding to VIDEO IN, S-VIDEO IN.
Æ page 37)
21
ENGLISH -