Sharp LC-15SH7U - 15" LCD TV Operation Manual page 17

[] Switching Each Mode [] Switching Audio Mode
Youcaneasiiyswitchwith the remotecentre! tothe DTV(ATSC) andTV Thissection describes h ow toswitchthe audioin tl_eanaiogmodeand how
[NTSC} o rto access a n external device when theyare connected tothe uniL to switch the audiolanguagein thedigital mode,
Press [INPUT] repeatedly to cycle through analog TV,
digital TV, tNPUTI and tNPUT2
[ANALOG MODE]
INPUT
[DIGITAL MODE]
[IN PUT 1 ]
[INPUT2]
• To use the video or S-video input jack on the unit,
select'iNPUT1"
• To use the component video input jack on the unit,
select "INPUT2'!
Note:
• When you switch the analog mode to the digital mode,
it may rake o while umil the digital channel selection b
completed Tile following TV screen is displayed while
switching the mode
While receiving an MTS broadcast, press [AUDIO]
repeatedly to cycle tllrough the available audio
channel
AUDIO pAIN]
AP]
[_ONOI
MAIN : Outputs main-audio
SAP : Outputs second audio program
MONa : Outputs mona-audio
• The information display will automatically disappear
in 10 seconds
_'_ Press [AUDIO] to display the currently selected
language and the number of available languages
AUDIO
2 Press [AUDIO] repeatedly to cycle through the available
audio languages
-3
[ENGLISH]
AUDIO _,
[SPANISH]
[FRENCH]
=J
• Available languages differ depending on the
broadcast "OTHER" is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.
. The information display will automatically disappear
in 10 seconds
Note€ v
{ .Pressing[AUDlO]doe, norcontrolexremataudiode ice. ]
EN