Advertisement
S P E C
F I L E
DVI-D Board for DLP™ Projector
This input board is designed for use with the DLP™ projectors. It enables the input of a digital signal (DVI-D) from
a computer. Remote control of the projector is also possible from an external computer connected via LAN.
Specifications
Power supply:
Power consumption:
Terminals:
DVI-D input:
LAN:
Dimensions (W x H x D):
Weight:
Operating temperature:
Operating humidity:
NOTE: Ready for single link only. Ready for the non-interlaced signals only with EDID2.
Dimensions
unit: mm
(Dimensions given in inches are approximate.)
Note: This illustration is not drawn to scale.
As of December 2006
NOTE: Please use the module only on the specified Panasonic DLP™ projector.
Provided from the DLP™ projector
Projector power consumption increases approximately 5 W
DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP
EDID1: 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p
EDID2: VGA (640 x 480) – U-XGA (1,600 x 1,200),
dot clock: 25 –162 MHz
RJ-45 x 1, 10Base-T/100Base-TX for network connection
204 x 32 x 214 mm (8-1/32˝ x 1-1/4˝ x 8-7/16˝)
310 g (10.9 lbs.)
0°C – 40°C
10% – 80% (no condensation)
576p and 720/50p signals can be input only when this unit is used with the PT-DW10000,
PT-D10000, PT-DW7000 or PT-D7700.
204
(8-1/32˝)
ET-MD77DV
Weights and dimensions shown are approximate.
Specifications subject to change without notice.
DLP and DLP logo are trademarks of Texas Instruments.
DVI-D output connector pin
assignment
no.
signal
1
T, M, D, S data 2-
2
T, M, D, S data 2+
3
T, M, D, S data 2/4 shield
4
T, M, D, S data 4-
5
T, M, D, S data 4+
6
DDC clock
7
DDC clock
8
NC
9
T, M, D, S data 1-
10
T, M, D, S data 1+
11
T, M, D, S data 1/3 shield
12
T, M, D, S data 3-
13
T, M, D, S data 3+
14
+5 V
15
GND
16
Hot plug detection
17
T, M, D, S data 0-
18
T, M, D, S data 0+
19
T, M, D, S data 0/5 shield
20
T, M, D, S data 5-
21
T, M, D, S data 5+
22
T, M, D, S clock shield
23
T, M, D, S clock +
24
T, M, D, S clock -
2
Advertisement
