Burst Function - Panasonic DMC-ZS25K Owner's Manual

Application (Record)

Burst function

A burst of still pictures can be recorded while the shutter button is pressed fully.
Select [Burst] from the [Rec] menu
Use cursor button to select the burst setting, and press
[MENU/SET]
Setting
*
2
([Hi-Speed
Burst])
*
2
([Flash
Burst])
[OFF]
*
1 The number of burst pictures is limited by the picture-taking conditions and the type and/or
status of the card used.
*
2 Only in [Program AE], [Aperture-Priority] and [Shutter-Priority] modes
Speed
• The subject is brought into focus as far as this
Approx. 2
is allowed by the burst speed. The pictures are
pictures/sec.
taken with the burst function while the exposure
and White Balance are being adjusted.
Approx. 5
• The burst speed may be reduced under certain
pictures/sec.
recording conditions.
Speed: Approx. 10 pictures/sec.
• Note on the available picture size settings (→89).
• The number of Burst recording pictures may
Complies with
increase when you use a card with fast writing
recording
speed or card is formatted.
conditions
• The focus, zoom, exposure, White Balance,
shutter speed, and ISO sensitivity are all fixed
to the settings for the first picture.
• The burst of still pictures can be recorded even
Complies with
in low light conditions as the flash is used.
recording • The focus, exposure, and flash level are all
fixed to the settings for the first picture.
conditions
• Note on the available picture size settings (→89).
— The burst function is released.
(→42)
Description
- 88 -
No. of
pictures
*
100 1
*
100 1
5
—
VQT4P14