Burst Function - Panasonic Lumix DC-ZS80D Owner's Manual For Advanced Features

Hide thumbs Also See for Lumix DC-ZS80D:
Table of Contents

Advertisement

Burst function

Recording mode:
Setting [Burst Rate]
Select [Burst] and pressing
Select the burst rate with
Speed (pictures/sec.)
Live View during
burst recording
Number of
recordable pictures
*
1
When recording is performed under the test conditions specified by Panasonic.
Pictures can be taken until the card becomes full. However, the burst speed will become slower
halfway through the recording. The number of burst pictures is limited by the picture-taking
conditions and the type and/or status of the card used.
About the maximum number of pictures that can be taken continuously
When you press the shutter button halfway, the maximum
number of pictures you can take continuously will appear. You
can check the approximate number of pictures that can be
taken before the burst speed slows down.
Example: When 20 pictures can be taken: [r20]
• Once recording starts, the maximum number of pictures that can be taken continuously
will decrease. When [r0] appears, the burst speed will slow down.
• When [r99+] is displayed, you can take 100 or more pictures continuously.
To cancel the burst function
Press [
] button ( ), and then select [
117
in step
, and press [MENU/SET]
[AFS] / [MF]
[AFF] / [AFC]
[AFS] / [MF]
[AFF] / [AFC]
With RAW files
*
1
Without RAW files
2
(→116)
[H]
(High speed)
(Middle speed)
10
5
None
Available
] ([Single]) or [
4K Photo and Drive Settings
[M]
(Low speed)
5
Available
Available
26 or more
100 or more
]
[L]
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dc-zs80

Table of Contents