Table of Contents
Advertisement
The following items appear when you enable the Remote.Access item.
Serial.port.number.[COM1]
Allows you to select the serial port for console redirection. Make sure the selected
port is enabled. Configuration options: [COM1] [COM2]
Baudrate.[19200]
Alllows you to select the serial port settings.
Configuration options: [115200] [57600] [338400] [19200] [9600]
Flow.Control.[None]
Allows you to select the Flow Control for console redirection.
Configuration options: [None] [Hardware] [Software]
Redirection.after.BIOS.POST.[Always]
Allows you to select the Redirection settings.
Configuration options: [Disabled] [Boot Loader] [Always]
Terminal.Type.[ANSI]
Allows you to select the target terminal type.
Configuration options: [ANSI] [VT100] [VT-UTF8]
VT-UTF8.Combo.Key.Support.[Disabled]
Allows you to enable the VT-UTF8 combination key support for ANSI/VT100
terminals. Configuration options: [Disabled] [Enabled]
ASUS RS120-E4/PA4
5-33
Advertisement
Table of Contents
