Asus RS120-E4 - 0 MB RAM User Manual page 59

4.. Hard.disk.activity.LED.connector.(4-pin.HDLED1)
For some storage cards, such as SCSI card, with access signals for external
LEDs, this connector allows the access signals to go through the front panel
IDE_LED lead.
®
P5M2-R
P5M2-R.Hard.disk.activity.LED.connector
5.. System.and.device.fan.connectors.(3-pin.FRNT_FAN1/2/3/4;.
REAR_FAN1/2)
The fan connectors support the system and device fans. Connect the
backplane fan cable to the FRNT_FAN4 connector on the motherboard,
making sure that the black wire of each cable matches the ground pin of the
connector.
These are not jumpers! Do not place jumper caps on the fan connectors!
®
P5M2-R
P5M2-R.Fan.connectors
ASUS RS120-E4/PA4
HDLED1
1
NC
ADD_IN_CARD_ACT#
ADD_IN_CARD_ACT#
NC
REAR_FAN1
GND
FAN Power
FAN Speed
PWM Control
FRNT_FAN1
FRNT_FAN3
REAR_FAN2
GND
FAN Power
FAN Speed
PWM Control
FRNT_FAN2
FRNT_FAN4
4-11