Table of Contents
Advertisement
2..
Color.
You can adjust Brightness,
Contrast, Saturation, Color
Temp., and Skin Tone from this
menu.
•.
Brightness: the adjusting
range is from 0 to 100.
is a hotkey to activate this
function.
•.
Contrast: the adjusting range is from 0 to 100.
activate this function.
•.
Saturation: the adjusting range is from 0 to 100.
•.
Color.Temp.: contains four modes including Cool, Normal, Warm, and
User Mode.
•.
Skin.Tone: contains three color modes including Reddish, Natural, and
Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
3..
Image
You can adjust Sharpness, Trace
Free, Aspect Control, ASCR,
Position (VGA only), and Focus
(VGA only) from this menu.
•.
Sharpness: the adjusting
range is from 0 to 100.
•.
Trace.Free: adjusts the
response time of the monitor.
•.
Aspect.Control: adjusts the aspect ratio to "Full", "4:3", or "OverScan"
(only available for the HDMI input).
•.
ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
•.
Position: adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
•.
Focus: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
•
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
3-2
is a hotkey to
Hide quick links:
Advertisement
Table of Contents
