Asus VS248H User Manual page 17

2. Color
You can adjust Brightness,
Contrast, Saturation, Color
Temp., and Skin Tone from this
menu.
• Brightness
range is from 0 to 100.
is a hotkey to activate this
function.
• Contrast
: the adjusting range is from 0 to 100.
activate this function.
• Saturation
• Color Temp.
User Mode.
• Skin Tone
Yellowish.
• Smart View
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
3. Image
You can adjust Sharpness, Trace
Free, Aspect Control, ASCR,
Position (VGA only), and Focus
(VGA only) from this menu.
• Sharpness
range is from 0 to 100.
• Trace Free
response time of the monitor.
• Aspect Control
(only available for the HDMI input).
• ASCR
: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
• Position
: adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
• Focus : reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
3-2
: the adjusting
: the adjusting range is from 0 to 100.
: contains four modes including Cool, Normal, Warm, and
: contains three color modes including Reddish, Natural, and
: provides better display quality under big viewing angle.
: the adjusting
: adjusts the
: adjusts the aspect ratio to "Full", "4:3", or "OverScan"
is a hotkey to