Table of Contents
Advertisement
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI
memory above the total physical memory. Enable this option only when you
install 64-bit operating system. Configuration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot
device. Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD]
[PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to decide whether to use the internal graphics device and select
the amount of memory used by the device.
Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
PEG Port Control [Auto]
Configuration options: [Auto] [Disabled]
PEG Force x1 [Disabled]
This item appears when the PEG Port Control item is set to [Auto].
Configuration options: [Enabled] [Disabled]
The following item appears only when you use the onboard VGA function and
set the Internal Graphics Mode Select item to [Enabled, 1MB] or [Enabled,
8MB].
Video Function Configuration
Advanced
Video Function Configuration
DVMT Mode Select
DVMT/FIXED Memory
HDMI Support
DVMT Mode Select [DVMT Mode]
Configuration options: [Fixed Mode] [DVMT Mode]
DVMT/FIXED Memory [256MB]
Configuration options: [128MB] [256MB] [Maximum DVMT]
The [Maximum DVMT] option signifies 384MB memory. This option appears
only when you install DIMM modules more than 1 GB.
HDMI Support [Enabled]
Enables or disables the onboard HDMI function.
Configuration options: [Disabled] [Enabled]
4-24
BIOS SETUP UTILITY
[DVMT Mode]
[256MB]
[Enabled]
Options
Fixed Mode
DVMT Mode
Chapter 4: BIOS setup
Advertisement
Table of Contents
