Asus P4V800D-X User Manual page 31

7. Front panel audio connectors (10-1 pin FP_AUDIO)
This connector is for the front panel audio cable. This connector supports the
front panel audio I/O ports.
P4V800D-X
P4V800D-X Front Panel Audio Connector
8. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for an ATX power supply. The plugs from the power
supply are designed to fit these connectors in only one orientation. Find the
proper orientation and push down firmly until the connectors completely fit.
P4V800D-X
®
P4V800D-X ATX power connector
If you will need to replace the power supply in the future, make sure that your
new ATX 12V power supply can provide 8 A on the +12 V lead and at least 1
A on the +5 V standby lead (+5VSB). The minimum recommended wattage is
230W, or 300W for a fully configured system. The system may become unstable
and may experience difficulty powering up if the power supply is inadequate.
ASUS P4V800D-X Motherboard
FP_AUDIO
BLINE_OUT_L
® BLINE_OUT_R
+5VA
AGND
ATX12V
+12V DC +12V DC
GND GND
+5V Standby
Line out_L
NC
Line out_R
MICPWR
MIC2
ATXPWR
+3 Volts Ground
+12 Volts +5 Volts
+12 Volts +5 Volts
+5 Volts
Power OK -5 Volts
Ground Ground
+5 Volts Ground
Ground Ground
+5 Volts PSON#
Ground Ground
+3 Volts -12 Volts
+3 Volts +3 Volts
1-21