10. The current RAID setup is displayed on the upper side of the screen.
Press < Q >
< Q >
< Q >
< Q >
< Q > to exit the RAID setup menu.
11. Press < Y >
< Y >
< Y >
< Y > then < E n t e r >
< Y >
12. When finished, you can partition and format the array as a single hard
drive.
3 - 1 4
3 - 1 4
3 - 1 4
3 - 1 4
3 - 1 4
< E n t e r >
< E n t e r > to save changes.
< E n t e r >
< E n t e r >
C h a p t e r 3 : S o f t w a r e s u p p o r t
C h a p t e r 3 : S o f t w a r e s u p p o r t
C h a p t e r 3 : S o f t w a r e s u p p o r t
C h a p t e r 3 : S o f t w a r e s u p p o r t
C h a p t e r 3 : S o f t w a r e s u p p o r t