Setting Up Using Web Config - Epson WorkForce 435 Manual

Epson Connect Guide
Install the ink cartridges
Setup on the printer's control panel
Connect to the network
Download and install Epson iPrint
2. Connecting to Epson Connect
Register printer and user information from Web Config
3. Setting up Scan to Cloud
Create Scan to Cloud Destination List
4. Setting up Remote Print service
Check that remote printing is enabled

Setting up using Web Config

You can setup the Epson Connect service by using Web
Config (a web page embedded in the printer).
1. Basic printer setup
First, connect your printer to a Wi-Fi network.
A
Follow the "Start Here" setup guide to perform
the initial setup for your printer.
B
Connect the printer to the local area network
from the printer's control panel.
For more information on the connection
procedure, see the printer's documentation.
2. Setting up Epson Connect
Create your Epson Connect account and register your
printer from Web Config.
Setting up the Services
A
Turn on the printer.
B
Open Web Config for the printer.
To display Web Config, see
Config" on page 17
C
Tap Firmware Update, and then follow the
instructions to update the printer's firmware.
D
Tap Epson Connect Services.
E
The printer registration screen is displayed.
Tap Register.
19
"To open Web