Scan To Cloud - Epson WorkForce 435 Manual

Epson Connect Guide
Change Print Settings
When you select print settings, all emails are printed
according to your settings. When multiple printers have
been registered, you can select print settings for each
printer.
A
Sign in to the User Page.
Note:
If multiple printers have been registered, select the
printer you want to configure from the printer list.
B
Select Print Settings in Email Print from the
menu on the left.
C
Select the print settings you want to use.
Note:
Print settings may differ depending on the model
being used.
D
Click or tap Apply.
This setting is enabled the next time email is
received.

Scan to Cloud

You can send your scanned file as an email to
destinations you registered previously from the
printer's control panel. Your scanned file is
automatically sent to the Epson Connect server and a
destination address as an email.
Using the Services
Depending on the model, the Scan to Cloud service may
not supported. See your regional Epson website to check
if the Scan to Cloud service is available for your printer.
Creating the Destination List
You need to register addresses to the Destination List on
the User Page to use the Scan to Cloud service. For more
information on registering the Destination List, see
Creating a Destination List for the Scan to Cloud
service" on page
Operating the printer's control panel
This section describes how to scan originals and send
data.
Note:
The screen displays may differ from your actual printer,
but the instructions are the same.
A
Turn on the printer and check that it is connected
to the network
When the printer is connected to the network, a
network icon is displayed on the LCD screen. For
more information about the network icon, see
the documentation provided with the printer.
Note:
You need to register your printer and your
account to the Epson Connect service, and then
you need to register a Destination List.
& See
to Cloud service" on page
B
Enter Scan mode from the Home menu, or press
the Scan button to enter Scan mode.
26
16.
"3. Creating a Destination List for the Scan
16.
"3.