Dell P703w - Photo All-in-One Printer Color Inkjet User Manual page 86

In Windows Vista®:
a. Click ® Programs.
b. Click Dell Printers.
c. Click Dell Photo P703w AIO Printer.
2. Select Dell Imaging Toolbox.
The Dell Imaging Toolbox opens.
3. Click Settings.
NOTE: Changes made to the printer settings become the default settings for most of the programs.
Tab Options
AIO Printer- Printer date and time- Select the check box to synchronize your printer's date and time with the computer.
General
Power save- Select timeout values between 1 and 60 minutes to enter standby mode.
Printer- Select the check box to hear a beep when you press a button on the Operator Panel.
Name- Your printer has a serial number that is used to construct name for Bluetooth printing. The default name is DellP703w+XXXX, where
XXXX represents the last four digits of the printer's serial number. You can change this to a more personalized name by entering a new
name.
AIO Printer- Print quality- Select Draft, Normal, or Best for non-photo paper. Draft produces the fastest print speed, but the lowest quality. Normal
Print delivers high-quality output and is the default setting. Best produces the highest quality for all paper.
Print options- Select Borderless, Bordered, 2 to 9 per page, 2 X 2, 3 X 3, and 4 X 4 Poster Layout. The photo layouts on your printer
"snap" to the nearest standard print size based on the combination of layout and paper size loaded whenever possible. Otherwise the
layouts are based on a standard 2x3 aspect ratio.
Print date on front- Select to print today's date on the front of the picture.
Quantity- Select the number to print.
Print colors as grayscale- Select the check box to print a color photo in black and white. The grayscale palette contains white, black, and 254
shades of gray. Each color in the image is replaced with a gray that matches its lightness value.
Automatically apply screen balance to digital camera pictures- Select the check box to adjust the color and density of digital images for
brighter color and truer flesh tones.
Enable printing of tagged pictures- Select the check box to enable the printer to detect tagged photo files (DPOF) and prompt you for the
options.
AIO Printer- Output quality- Select Draft, Normal, or Best for non-photo paper output quality.
Copy
Copy options- Select Same Size, Fit to Page, Scale Percent, or Photo Layouts.
Size- Set the percentage you want to scale your copies. It is enabled when you select Scale Percent in the Output.
Layout- Select your preferred layout to print one of more photos on the size paper loaded (see Layouts). It is enabled when you select Photo
Layouts from the Output.
Brightness- Use the slide-bar to increase or decrease the brightness of copies.
Quantity- Sets the default number of copies to the value you select.
Print colors as grayscale- Select the check box to print a color photo in black-and-white. The grayscale palette contains white, black, and 254
shades of gray. Each color in the image is replaced with a gray that matches its lightness value.
Scan-General Default item type- Select Documents or Pictures.