Setting The Date And Time - AgfaPhoto DC-630 User Manual

Setting the Date and Time

When the camera is first turned on, the date and time setting will not be correct. So before
using, be sure to set date and time.
1. Press the MENU button, using
SETUP ( ) and press the SET button.
2. Press or
press or the SET button to launch the Date &
Time screen.
3. Press or
highlighted field. Press
another field.
4. After adjusting the settings, press the SET or the
MENU button to apply the setting.
If you hold down
For printing images with Date & Time,
If the batteries are removed for about two days, the Date & Time setting will be lost. In
this case, make these settings again.
or
to select DATE & TIME (
to change the value of the
or to highlight
or , you can change the value quickly.
to select
) then
NOTE:
- 14 -