File Naming; Setting The Tv Out; Setting Usb Port - AgfaPhoto DC-630 User Manual

File Naming

File name begins with "DSCI" and are followed by a 4-digit number that increases in
sequence. File numbering starts from 0001 when a new folder is created.
If the highest folder number is 999 and highest file number exceeds 9999, the camera will
display the warning message "Folder cannot be created". When it appears, try one of the
following ways:
Reset the file number and plug in a new memory card.
The folder number and file number are initialized and renumbered from 100 and 0001
respectively.
Do not change the folder and file names in the memory card using your computer. It may
be unable to playback the data using the digital camera.

Setting the TV Out

Your camera can be connected to a TV allowing you to preview images and movie clips on the
television screen. TV Out should be set to either NTSC or PAL depending on your region.
Option
NTSC
PAL

Setting USB Port

You can set USB mode to connect the camera with a printer or computer.
Option
Computer
Printer
America, Japan, Taiwan, Korea
All of Europe
To connect your camera to a PC.
To connect your camera to a printer.
NOTE:
Description
Description
- 41 -