Integrated Peripherals
USB Functions
This setting is used to enable/disable the onboard USB host controller.
USB Legacy Support
Set to [Enabled] if your need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS and SCO
Unix. Set to [Disabled] only if you want to use any USB device other than the USB
mouse.
Onboard LAN Controller
This setting controls the onboard LAN controller.
Onboard LAN Option ROM
The item enables or disables the initialization of the onboard LAN Boot ROMs during
bootup. Selecting [Disabled] will speed up the boot process.
Onboard IEEE1394 Controller
This setting controls the onboard IEEE1394 controller.
Onboard IDE Controller
This setting controls the onboard IDE controller.
Onboard Audio Controller
This item allows you to enable/ disable the audio controller. Disable the function if you
want to use other controller cards to connect an audio device.
On-Chip ATA Devices
Press <Enter> to enter the sub-menu:
PCI IDE BusMaster
This item allows you to enable/ disable the PCI IDE busmaster.
BIOS Setup
3-11