Onboard Devices Configuration; Apm - Asus A85XM-A User Manual

UMA Frame Buffer Size [Auto]
This item appears only when you set the previous item to [Force]. Configuration options:
[Auto] [32M] [64M] [128M] [256M] [512M] [1G] [2G]
2.5.5

Onboard Devices Configuration

HD Audio Device [Enabled]
[Enabled]
[Disabled]
The following two items appear only when you set the HD Audio Device item to [Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-
definition audio depending on the audio standard that the front panel audio module supports.
[HD]
[AC97]
SPDIF Out Type [SPDIF]
[SPDIF]
[HDMI]
Realtek LAN Controller [Enabled]
[Enabled]
[Disabled]
Realtek PXE OPROM [Disabled]
This item appears only when you set the Realtek LAN Controller item to [Enabled] and
allows you to enable or disable the Rom of the Realtek LAN controller. Configuration options:
[Enabled] [Disabled]
2.5.6

APM

Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
WOL (include AC Power Loss) [Disabled]
[Disabled]
[Enabled]
2-20
Enables the High Definition Audio Controller.
Disables the controller.
Sets the front panel audio connector (AAFP) mode to high definition audio.
Sets the front panel audio connector (AAFP) mode to legacy AC'97.
Sets to [SPDIF] for SPDIF audio output.
Sets to [HDMI] for HDMI audio output.
Enables the Realtek LAN controller.
Disables the controller.
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Disables Wake On LAN after a power failure (G3 state).
Enables Wake On LAN after a power failure (G3 state).
Chapter 2: BIOS information