Table of Contents
Advertisement
CPU Level 1 Cache, CPU Level 2 Cache [Enabled]
These fields selects the CPU Level 1 and Level 2 built-in cache. The default
enables the caches. Configuration options: [Disabled] [Enabled]
CPU Level 2 Cache EEC Check [Enabled]
This fields sets up the check for the Level 2 built-in cache EEC check.
Configuration options: [Disabled] [Enabled]
BIOS Update [Enabled]
This field functions as an update loader integrated into the BIOS to supply
the processor with the required data. When set to [Enabled], the BIOS loads
the update on all processors during system bootup. Configuration options:
[Disabled] [Enabled]
PS/2 Mouse Function Control [Auto]
The default setting [Auto] allows the system to detect a PS/2 mouse at startup.
If a mouse is detected, the BIOS assigns IRQ12 to the PS/2 mouse.
Otherwise, IRQ12 can be used for expansion cards. When you set this field
to [Enabled], BIOS reserves IRQ12, whether or not a PS/2 mouse is detected
at startup. Configuration options: [Enabled] [Auto]
USB Legacy Support [Auto]
This motherboard supports Universal Serial Bus (USB) devices. The default
of [Auto] allows the system to detect a USB device at startup. If detected, the
USB controller legacy mode is enabled. If not detected, the USB controller
legacy mode is disabled. When you set this field to [Disabled], the USB
controller legacy mode is disabled whether or not you are using a USB device.
Configuration options: [Disabled] [Enabled] [Auto]
OS/2 Onboard Memory > 64M [Disabled]
When using OS/2 operating systems with installed DRAM of greater than
64MB, you need to set this option to [Enabled]. Otherwise, leave to the default
setting [Disabled]. Configuration options: [Disabled] [Enabled]
58
Chapter 4: BIOS Setup
Hide quick links:
Advertisement
Table of Contents
