Figure C-19: Security Policy Editor pre-shared key
Configure the VPN Client Authentication Proposal.
5.
In this step, you will provide the type of encryption (DES or 3DES) to be used for this
connection. This selection must match your selection in the VPN router configuration.
In the Network Security Policy list on the left side of the Security Policy Editor
a.
window, expand the Security Policy heading by double clicking its name or clicking on
the "+" symbol.
Expand the Authentication subheading by double clicking its name or clicking on the "+"
b.
symbol. Then select Proposal 1 below Authentication.
Figure C-20: Security Policy Editor authentication
NETGEAR VPN Configuration
v3.0, September 2005
DG834G Reference Manual
C-23