NETGEAR DG834GUv5 Reference Manual page 129

Information on the progress and status of the VPN client connection can be viewed by opening the
NETGEAR ProSafe Log Viewer.
1. To launch this function, click on the Windows Start button, then select Programs, then
NETGEAR ProSafe VPN Client, then Log Viewer.
2. The Log Viewer screen for a successful connection is shown below:
Figure 8-17: Log Viewer screen
Note: Use the active VPN tunnel information and pings to determine whether a failed
connection is due to the VPN tunnel or some reason outside the VPN tunnel.
3. The Connection Monitor screen for this connection is shown below:
Figure 8-18: Connection Monitor screen
In this example you can see the following:
Virtual Private Networking
v3.0, September 2005
DG834G Reference Manual
8-19