Table of Contents
Advertisement
Settings dialog box, ensure that Use a proxy server for your LAN
(These settings will not apply to dial-up or VPN connections).
check box is not selected.
Step 8
Try to access multiple other Web sites to check whether the terminal can
access.
If the terminal still cannot access other Web sites, contact your network service
provider.
What can I do if Web pages often cannot be displayed during Web page browsing and
can be displayed after the terminal is restarted?
Step 1
Ensure that the terminal and other devices such as telephones or fax
machines are connected to the telephone line through a splitter.
For details about how to install a splitter, see the related description in the manual.
Step 2
Ensure that telephone lines are properly connected.
If the telephone lines are improperly connected, the stability of the network
connection is affected.
Step 3
Check the positions of your terminal and computer. Ensure that they are far
from the electric appliances such as microwave ovens, refrigerators, or
cordless telephones that generate strong magnetic or electric fields.
If the problem persists, contact your service provider.
After a broadband terminal is installed, does Internet access degrade call quality or do
telephone calls lower the Internet access rate?
No. The terminal uses the frequency division multiplexing (FDM) and splitter
technologies to separate voice signals from data signals. Although the two types of
signals are transmitted through one telephone line, they are carried by different
frequency bands. Therefore, they do not interfere with each other. In this case, you
can make a telephone call and access the Internet at the same time, without degrading
call quality or lowering the Internet access rate.
How can I quickly restore the default settings of the terminal?
To restore the default settings of the terminal, power on the terminal, press and hold
the RESET button for a while, and then release the RESET button.
12
Advertisement
Table of Contents
