Table of Contents
Advertisement
4 Configuring the MT880a
4.1 Changing the Administrator Password Used
for Logging In to the Web Configuration Page
For safety reasons or to make the password easy to remember, you can change the
log-in administrator password after logging in to the Web configuration page.
To change the password, do as follows:
Step 1
Choose Tools > System Management in the navigation tree to display the
system management page.
Step 2
Click
Step 3
Enter the old password and the new password, and then enter the new
password again in the Retype to confirm text box for confirmation.
Step 4
Click Submit.
After you change the password successfully, the current page jumps to the page for
logging in to the Web configuration page. To log in to the Web configuration page,
enter the new password, and then click OK.
If you cannot remember the user name and password that have been
changed, you can restore the default settings of the MT880a by pressing the
RESET button on the panel. In this way, the user name and the password
used for logging in to the Web configuration page are restored to default
values.
4.2 Changing the IP Address
To make the IP address easy to remember, you can change the IP address after logging
in to the Web configuration page.
To change the IP address, do as follows:
Step 1
Choose Basic > LAN Setting in the navigation tree to display the LAN
settings page.
Step 2
Enter a new IP address in the IP Address text box.
Step 3
Click Submit.
After the IP address is changed successfully, to log in to the Web configuration page,
you need to launch the Internet Explorer and enter the new IP address in the address bar.
to display a dialog box.
9
Advertisement
Table of Contents
