Setting The Network-Access Parameters; Accessing The Network Through The Embedded Ppp Dial-Up Software Of The; Mt880A - Huawei SmartAX MT880a User Manual

Adsl cpe
Hide thumbs Also See for SmartAX MT880a:
Table of Contents

Advertisement

3 Setting the Network-Access Parameters

By configuring the MT880a and the computer, you can choose any of the following
methods to surf the Internet:

Accessing the Network Through the Embedded PPP Dial-Up Software of the

MT880a

Accessing the Network Through the PPP Dial-Up Software on the Computer
3.1 Accessing the Network Through the
Embedded PPP Dial-Up Software of the MT880a
If you select this method for accessing the network, the MT880a starts to set up dial-up
connection automatically after the startup. You can access the network after you power
on the computer. You do not need to install any special dial-up software on the
computer or perform the dial-up operations on the computer. To configure the MT880a
and the computer for the network access, do as follows:
Step 1
Log in to the Web configuration page.
1. Launch the Internet Explorer on the computer. Enter http://192.168.1.1
in the address bar and press Enter.
2. In the displayed dialog box, enter the user name and the password, and
then click OK.
By default, both the user name and the password are admin. After the password is
verified, you can access the Web configuration page.
Step 2
Enable the embedded dial-up function.
1. In the navigation tree on the left of the configuration page, choose Basic >
WAN Setting.
2. Select a PVC number, such as 1, from the PVC drop-down combo box.
3. In the VPI and VCI text boxes, enter the VPI and VCI values that are
provided by the network operator .
4. Select Yes from the Active drop-down combo box and select Routing
from the Mode drop-down combo box.
5. Enter the operator name, user name, and password in the Login
Information dialog box and keep the default settings of other parameters.
6. Click Submit to save the settings.
After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations only once. The next time when you
power on the computer, you can surf the Internet without performing any configuration.
7

Advertisement

Table of Contents
loading

Table of Contents