Table of Contents
Advertisement
Common phenomena
Phenomena
The spinning is intermittent when it starts.
Push the "spin" button to select "Spin", but it doesn't
work.
There may be some water flowing out of the drain hose
in the first use of the machine.
The pulsator pauses during water inlet in wash
and rinse.
Packing list
Name
User's manual
Warranty card
Water inlet hose
The side of connection between the water inlet
hose and the washing machine
The side of connection between the jointer of
the water inlet hose and the water faucet
Bottom plate
Put between the up gasket and
the up seal of the packing box
Tapping screw
Fully automatic washing machine
Explanation
Balance the laundries to avoid slanting.
The program is setting the drain time. Some time is
needed before it starts spinning.
It is the water remained in the factory inspection of
performance.
It is to avoid splashing during water inlet.
Quantity
One piece
One piece
One piece
One piece
One piece
One set
Advertisement
Table of Contents
