Table of Contents
Advertisement
Trouble-shooting · Answer to question
(If there's breakdown, please pull off the power plug before checking)
The following phenomenon are not breakdowns sometimes. Please con rm again before sending it to
repair.
If there are real breakdowns, please come to the special maintenance department or after-sale
service department of our company. Do not repair it by yourself.
Phenomena
The digitron displays E0.
The top lid is open during
reserve procedure.
Is the drain hose blocked?
The drainage cannot
work, or is too slow. The
digitron displays E1.
The top lid is not closed.
When using the child lock function,
It stops running in
if the top cover is opened, the
midway. The digitron
machine will stop and display E2
displays E2.
alarm. After 15 seconds the machine
will automatic drainage
The safety switch acts,
Are the laundries put slantingly?
and the spinning cannot
Is the machine slanting?
work. The digitron
displays E3.
Is the water tap opened, or is
there water supply failure?
The water lling does
Is the water inlet valve blocked?
not work, or is slow, the
Is the water pressure too low?
digitron displays E4.
The digitron displays E6.
The water level sensor is bad.
The digitron displays F2.
Overflow alarm
The
Is there power failure?
machine
Is the power plug inserted tightly?
Not wash
does not
Is the water level reached preset
act
position?
Is the power plug inserted tightly?
Not spin
Is the top lid closed reliably?
Are the laundries set at?
Is the machine slanting?
Are the laundries put slantingly in
There is abnormal sound
spinning?
inside the machine
Are there any foreign materials?
Is the screw of the jointer of water
The water tap leaks
inlet hose loose or awry?
The reason
How to settle
Close the top lid.
Clean the foreign material. Open and
close the top lid once.
Close the top lid.
Clear the E2 alarm, please close the top
cover and press the "START/PAUSE"
button. Then E2 alarm will be cleared.
Reorder the laundries. Close the top lid.
Place the machine horizontally, open
and close the top lid once.
Open the water tap. Open and close the
top lid once.
Clean the water inlet valve then open
and close the top lid once.
Use after the water pressure is normal.
Please contact the after-sales service
department.
Please contact the after-sales service
department.
Please use it when there's power
supply.
Insert the power plug tightly.
Fill water to the preset position.
Insert the power plug tightly.
Close the top lid.
Set the laundries at.
Adjust the machine to be even
Reorder the laundries and close the top
lid.
Remove the foreign materials.
Fasten the screw of the jointer properly.
Advertisement
Table of Contents
