Acura 2008 RL Owner's Manual page 459

Hide thumbs Also See for 2008 RL:

Table of Contents

Checking and Replacing Fuses

If something electrical in your

vehicle stops working, the first thing

you should check for is a blown fuse.

Determine from the chart on pages

, or the diagram

on the fuse box lid, which fuse or

fuses control that device. Check

those fuses first, but check all the

fuses before deciding that a blown

fuse is the cause. Replace any blown

fuses, and check if the device works.

Turn the ignition switch to the

LOCK (0) position. Make sure the

headlights and all other

accessories are off.

Remove the cover from the fuse

Check each of the large fuses in

the under-hood fuse box by

looking through the top at the wire

inside. Removing these fuses

requires a Phillips-head

screwdriver.

Check the smaller fuses in the

under-hood fuse box and all the

fuses in the interior fuse boxes by

pulling out each fuse with the fuse

puller. The fuse puller is inside the

primary under-hood fuse box.

Chapters

Table of Contents