Acura 2008 RL Owner's Manual page 417

BULB
On model without adaptive front
lighting system
Pull the bulb straight out of its
socket.
4. Install the new bulb into the
SOCKET
socket.
5. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
6. Turn on the lights to make sure
the new bulb is working.
7. (Driver's side)
Reinstall the battery and the
battery cover.
8. Reinstall the engine compartment
side cover.
Replacing a Front Position/Side
Marker Light Bulb
1. Remove the left or right side
engine compartment cover (see
page 398 ).
If you are replacing a driver's side
bulb, slide the battery toward the
engine to get more clearance (see
page 428 ).
2. (Passenger's side)
Use a flat-tipped screwdriver to
remove the holding clip from the
windshield washer reservoir.
CONTINUED
Lights
411