Acura 2008 RL Owner's Manual page 415

1. Remove the left or right side
engine compartment cover from
the side you are working on by
carefully pulling the cover out (see
page 398 ).
NUTS
BATTERY HOLD-DOWN
If you are replacing the bulb on
the driver's side, remove the
battery cover (see page 428
remove the battery hold-down by
removing the two nuts with a 10
mm wrench. Then carefully slide
the battery toward the engine to
access the bulb.
2. Remove the electrical connector
from the bulb by pushing on the
), then tab and pulling the connector
down.
3. Remove the bulb by turning it one-
quarter turn counterclockwise.
Lights
BULB
CONNECTOR
CONTINUED
409