Kyocera C8100DN - Color Laser Printer Operation Manual page 52

COMMAND CENTER Pages
Advanced > Security > Secure Protocols
48
Item
Auto Sending
Max Job Log
Run once now
You can encrypt communication between a PC and this machine using SSL encryption.
After you have changed this setting, you must restart this machine. For the restarting
procedure, refer to Basic > Defaults > Reset on page 9.
Item
SSL
Serverside
Settings
Effective
Encryption
HTTP
Security
Secure
Only
(HTTPS)
Not
Secure
(HTTPS &
HTTP)
IPP Security
Secure
Only (IPP
over SSL)
Not
Secure
(IPP over
SSL&IPP)
Clientside
Settings
Effective
Encryption
Certificate
Verification
Description
Determines whether the job log report is sent or not. Set this
to On to send the report.
Set the number of job logs for sending, from 1 to 1500.
You can test this by clicking the Send button to immediately
send a report.
Description
Specifies whether or not to use the SSL protocol.
Selects the encryption algorithm(s) to be used.
Specifies the security level.
Encrypts all communication. Access is possible only with a
URL that begins with "https://." Access attempts using an
ordinary http:// URL are automatically redirected to the URL
where "http://" is replaced with "https://."
Enables access for both encrypted and unencrypted
communication. Access is possible with https:// and http://
URLs. The former URL establishes encrypted communication
and the latter establishes normal communication.
Specifies the security level.
Encrypts all communications.
Enables access for both encrypted and unencrypted
communications.
Allow you to specify the encryption algorithm for data
communication. You can use more than one algorithms at a
time.
When set On, verify the expiration of the server certificate at
communication. If found expired, communication will fail.
When set Off, the expiration will not be verified.
KYOCERA COMMAND CENTER