Character Input; Setup Utility - Panasonic CF-27LBAGHEM - Toughbook 27 - PIII 500 MHz Operating Instructions Manual

Disk Operations
Cannot read/write to a
floppy disk
Unable to write to a floppy
disk
How to format a floppy
disk is unclear
Unable to read/write to the
hard disk
Others

Character Input

Unable to input anything
but numerals
Only capital letters are
being input
How to input European
characters (ß, à, ç),
symbols or Euro Currency
Symbol is unclear

Setup Utility

[Enter Password] is dis-
played
[Advanced] menu can not be
registered
All or some items in [Secu-
rity] menu can not be regis-
tered
The timeout functions do
not work
Windows 95
Has the floppy disk been correctly inserted?
Has the floppy disk been correctly formatted?
Has the Setup Utility been used to set [Floppy Operation] to [Enable]? (
Utility")
Your floppy disk content may be corrupted.
Is the floppy disk write-protected?
Select [Format] in [My Computer] - [3 1/2 Floppy (A:)] - [File]. After confirming the disk
volume and format type, start formatting.
Your drive or file may not have been properly set.
Check to see if the hard disk is full. If it is full, delete unnecessary files.
Your hard disk content may be corrupted. Contact Panasonic Technical Support.
Try testing another drive or media.
If NumLk and Key Pad are on, the Numeric Key Pad is ON. To switch it OFF,
press Fn + Key Pad .
If CapsLock is on, the Caps Lock function is ON. To switch it OFF, press
Caps Lock .
Select [Start] - [Programs] - [Accessories] - [Character Map]. The Character Map will be
displayed. Point to the desired font name and select it.
Enter the User Password or Supervisor Password. If you have forgotten it, contact Panasonic
Technical Support.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
If the Panasonic Battery Monitor is being displayed, close it.
"Setup
25