Panasonic CF-27LBAGHEM - Toughbook 27 - PIII 500 MHz Operating Instructions Manual page 13

Label-side up
Insert the shutter-side
headfirst.
Eject Button
10
Select [Next] at the [Card Executive 2.0 for NT Diagnostics].
17
NOTE
The diagnostics may take about two minutes.
Select [Next], then select [Finish].
18
Windows will restart.
Select "Windows NT Workstation Version 4.00" and press
19 The [Begin Logon] display will appear. Perform the operation in step
Double-click the [Internet Explorer] icon to install Internet Explorer.
20
Follow the on-screen instructions.
Set the correct settings for all items in [Control Panel]-[Regional Settings] and [Date/
21
Time] etc.
CAUTION
Be sure to perform [Calibration] in [Start] - [Settings] - [Control Panel] - [Mouse] -
[Touchscreen], so that when you touch the display, that touch will correspond to the
exact same location on the computer (i.e., no displacement).
( "Touchscreen")
9
Create floppy disks
Prepare 2HD floppy disks and make sure they are not in the write-protected state,
then select [Start] - [Programs] - [Panasonic] - [Create BACKUP DISK] and follow
the on-screen instructions. Place a label identifying the contents on each disk.
Name of created backup disk
FIRSTAID FD
(When the display for creating the UPDATE DISK is shown, create the disk by
following the on-screen instructions.)
CAUTION
Store the floppy disks in a safe place. They will enable you to return your
computer to close to the condition at the time of purchase should any problems
occur.
When creating floppy disks, do not run any other application program.
When creating floppy disks and the message [Insufficient files to copy] is dis-
played, click [OK] and then contact Panasonic Technical Support.
While the MP indicator (
your computer or use the suspend or hibernation function (
pend/Hibernation Functions").
Install Acrobat ® Reader 4.0
NOTE
®
Acrobat Reader is necessary to view the Reference Manual, which explains
detailed operational procedures concerning your computer.
1
In [Start] - [Run], input [c:\util\reader\Ar40eng.exe], then press [OK].
2 Press [Next] and set up the Acrobat
After reading the "Software License Agreement", select [Accept] if you agree
3
to the terms.
Press [Next].
4
At the [Setup Complete], select [Yes, I want to restart my computer now], then
5
select [Finish].
) is on, do not remove the floppy disk, power down
Windows NT
®
Reader 4.0.
Enter
.
9 .
"Sus-
13