Envelope Feed Service Check - Lexmark 1000 Color Jetprinter Service Manual

4096-00X
FRU
5 Home Position
Sensor
6 Maintenance
Station

Envelope Feed Service Check

FRU
1 Envelope Guide
2-6
Service Manual
Action
Be sure the carrier returns to the home position
after turning the printer on. If the carrier moves half
way, or if there is an abnormal sound, turn the
printer off and disconnect N3 from the system
board. Turn the printer on and check for 5 V dc
between N3-4 and N3-2 on the system board. If
the voltage is present, replace the home position
sensor. If the voltage is not present, replace the
system board.
A problem with the maintenance station can cause
carrier movement problems at the right margin. Go
to the "Maintenance Station Service Check" on
page 2-7.
Action
Be sure the envelope guide has been turned to
the envelope load position.
Be sure the envelope guide is against the
envelopes.