Canon 1438B002 - PIXMA iP4300 Photo Printer Quick Start Manual page 14

Layout and Trimming Settings
If these settings are set to Default (the setting to follow that of the printer) on the PictBridge
compliant device, Borderless is applied for Layout and Off (No trimming) is applied for
Trimming.
When printing onto Photo Stickers (PS-101), select N-up for Layout, then select 16-up.
* Some PictBridge compliant devices may display the Layout option 2-up, 4-up, 9-up, and
16-up. In this case always select 16-up.
* If there are no options on the PictBridge compliant device that correspond to 16-up,
printing on stickers is not possible.
* When printing on Photo Stickers (PS-101), do not set Layout to Borderless.
Image Optimize Setting
If Image optimize is set to Default (the setting to follow that of the printer) on the PictBridge
compliant device, ExifPrint is applied.
If you are using a Canon-brand PictBridge compatible device, additional options of VIVID,
NR, or VIVID+NR may be available, depending on the model.
* VIVID prints green and blue portions of photos more vividly.
NR (Noise Reduction) reduces noise in blue portions, such as the sky, and dark portions.
VIVID+NR is a combination of the VIVID and NR functions.
Date/File No. Print Setting
If Date/File No. print is set to Default (the setting to follow that of the printer) on the
PictBridge compliant device, Off is applied.
If the images already have dates superimposed when shot, set this PictBridge setting item to
Off. If you select Date, File No., or Both, the date and/or file number will be printed over the
date printed by the camera's function.
Note
Never disconnect the USB cable during printing unless when explicitly allowed to by the
PictBridge compliant device.
When disconnecting the USB cable between the PictBridge compliant device and printer, follow
the instructions given in the device's instruction manual.
You cannot set or do the following by operating on the PictBridge compatible device.
– Print quality setting
– Printer maintenance
Confirming and Changing PictBridge Print Settings on the Printer
You can confirm and change the default settings for items such as media type and size that are
preset to the printer and applied to PictBridge printing. To change the settings, you need to install
the Canon Setup Utility from the Setup CD-ROM and connect the printer to your computer. For
details, refer to the User's Guide on-screen manual.
Printing Photographs Directly from a Compliant Device 11