Connecting Up; Receiver Subwoofer; Side Panel - Pioneer HTS-LX70 Operating Instructions Manual

02

Connecting up

Chapter 2
Connecting up

Receiver subwoofer

Side panel

IN
SIRIUS
1
• There is a cover over the connectors on the side
panel.
A. When making connections, lift the two hooks and
remove the cover.
B. Once connections are finished, line up the three
positions and place the cover back in its original
position.
A
1 SIRIUS IN terminal
See Using SIRIUS Radio on page 42.
2 XM IN terminal
See Using XM Radio on page 40.
3 CONTROL OUT jacks (x2)
Connect other Pioneer components with the supplied
control cable.
10
En
ANTENNA
AM LOOP
OUT 1 OUT 2
IN 1 IN 2
IN
XM CONTROL OPTICAL
FM
UNBAL 75 Ω
DIGITAL
2 3 4 5
B
L
R R L L
R
FRONT CENTER FRONT
SPEAKERS ( 8 Ω )
ANALOG
AUDIO IN
6 7 8
4 DIGITAL OPTICAL IN jacks (x2)
To listen to optical digital audio, change the input to
Digital 1 or Digital 2.
When the digital output jacks of your TV are connected to
these jacks, set 'TV Input' (see page 48).
5 AM LOOP antenna terminal
6 FM antenna socket
7 ANALOG AUDIO IN jacks
Handle sound from an external component by using
stereo audio code. To listen to analog audio, change the
input to Analog.
When the analog output jacks of your TV are connected
to these jacks, set 'TV Input' (see page 48).
8 SPEAKERS terminals
Match the colors of the speaker cords to their respective
connectors.
9 AC IN – Power inlet
R L
AC IN
SURROUND SUBWOOFER
9